Welcome to my shop!
Feel free to look around and if you hover your mouse over a tool you can click on the highlighted tools to find out what makes my shop run! I have included links to many of the tools I use and videos related to them. I hope you enjoy this virtual tour and feel free to send me a email with any questions or comments you might have. Thanks for stopping by!
Grizzly G0555LX Bandsaw
This 14' bandsaw makes short work of unsuspecting lumber
Grizzly G0555LX Deluxe Bandsaw, 14-Inch
Central Machinery 34706 Wood Lathe
Kobalt 26 Gallon Air Compressor
I use a 26 gallon air compressor for all my air tools and general compressed air needs (cleaning shop).
Craftsman 10" Compact Sliding Compound Miter Saw
At my miter saw station I have the Craftsman 10" Compact Sliding Compound Miter Saw. One of the main reasons I chose this saw other than the value is that it doesn't require a lot of room behind the saw like most sliding miter saws.
GarageworX CNC 4x4
I use the GarageworX CNC 4x4 (www.garageworxcnc.com) with a Dewalt DW611 1.25HP Router as the spindle and have added the 2.8w Laser available at JTech Photonics (www.jtechphotonics.com). Of the several CNC Router Tables I have worked with this is by far the best quality and value. Who wouldn't want some safety orange in their shop.
Grizzly G0690 Cabinet Table Saw with Riving Knife
At the center of my shop is the work horse, my Grizzly G0690 10" Table Saw. This 3HP cabinet saw delivers all the power and accuracy that is needed for the wide range of woodworking done here in my shop.
Performax 16-32 Plus Drum Sander
The Performax 16-32 Plus is a huge help in the shop for cleaning up panels after glue ups and many other jobs that helps make the shop more efficient. To collect the fine dust from the drum sander I use a dedicated 1HP wall hanging dust collector. The G0710 has been upgraded with the T10877 Canister filter.
Grizzly G0453ZW 15" Planer with Spiral Cutterhead
This beast makes short work of taking lumber down to its final thickness with ease. With its 3HP motor and 72 individual carbide cutters it produces a clean cut with even the gnarliest of grain. The Grizzly G0453ZW was a welcome addition to my shop after I burned through my lunchbox planer. The only thing better than a 15" thickness planer is a 20" one!
Grizzly G0654 6" Jointer
I use the Grizzly Go654 6" Jointer which I have since upgraded with the H7653 Indexable Insert Spiral Cutterhead.
Oneida Air Systems Super Dust Deputy
I use the Super Dust Deputy by Oneida for my chip separator and have attached it to a 55 gallon drum.
Ridgid Oscillating Edge/Belt Spindle Sander
I have the Ridgid Oscillating sander that has both a belt for edge sanding and an assortment of spindles to sand curves.
Millermatic 252 MIG Welder
For any welding that needs to be done in my shop I have the Millermatic 252 MIG Welder and am set up to do both shielded gas and flux core wire welding. Since I am limited in space I use the ArcStation Workbench which I can wheel out into the driveway and safely weld.
Router Table with lift
This is my version of the New Yankee Workshop router table but made for a tall man. The top, fence, and lift were purchased from Rockler and I use a Porter Cable 690 Router. There is drawers for both 1/2" and 1/4" shank bits and dust collection both at the fence and in the cabinet.
Craftsmen 15" 1/2 HP Floor Standing Drill Press
This vintage Craftsmen Floor Standing Drill Press was a craigslist find that after some minor rust removal and cleanup is a great tool.
Central Machinery 2HP Dust Collector
For the main dust collection in my shop I use the 2HP Dust Collector sold by Harbor Freight. I have upgraded the filter to the cartridge style filter sold by Wynn Environmental.
Sticker Cabinet (AKA Storage cabinet)
Here is where I display my proud collection of stickers from my fellow woodworkers, makers, and YouTube content creators. Send me an email if you'd like one of your own Merzke Custom Woodworking stickers or would like to swap stickers with me.